Sealing Machines for Polyethylene
(ONE SIDE HEATED)
BANDRITE BANDSEALER Model 6000
See product information under section titled “Sealing Machines for Polyethylene and Barrier Materials."
POLY MOTOR JAW Model PMJ Shipped via UPS (wt. 27#).
Semi automatic bag sealer. Can seal up to 30 bags per minute on automatic cycling. Can expect 15 bags per minute under normal operation. The machine can also be operated with a foot activated switch for single bag operation. Dwell control is recommended, but is also available with dwell control. The gear motor drive gives repeatability of pressure and dwell.
Seal Width: 3/8" standard; 1/8" optional for 2 mil and under
Seal Length: 15" standard, 12" also available; 19" optional with approval from PackRite
Sealing Capacity: No Dwell, 3 mil. and under; With Dwell, 3 mil and up.
Temperature Range: Up to 550F
Electrical: 115 volts, 60 cycle, 1 phase, AC
Accessories (Optional) Incline Base: 30 degrees angled towards operator
Universal Sealer Stand: powder coated metal stand
POLY JAW Model PJ Shipped via UPS (wt. 23#).
Manual bag sealer will seal an average of 10 to 12 bags per minute depending on operator speed. The operator controls pressure and dwell by how long and how hard they step on the footpedal. The unit must be mounted to the work surface or stand. A clearance hole must be drilled through the work surface for connecting the foot pedal to the sealer. The foot pedal and guard must be secured to the floor.
Seal Width: 3/8" standard; 1/8" optional for 2 mil and under
Seal Length: 12", 15", 19" standard
Sealing Capacity: 8 mils maximum
Temperature Range: Up to 550F
Electrical: 115 volts, 50/60 cycle, 1 phase, AC standard 230 volts, 50/60 cycle optional
Accessories (Optional) Incline Base: 30 degrees angled towards operator Vertical Mounting Base: for liquid or powders Universal Sealer Stand: powder coated metal stand
ROBOT JAW SEALER Model RTP Shipped via truck (wt. 110#).
Air operated sealer normally used in medical and laboratory applications that require validation. Also sold as Model R for barrier materials. Features extremely accurate control of temperature, pressure and dwell. Sold to larger companies to determine sealing parameters before starting high volume production lines.
Seal Width: 3/8" standard; 1/8" optional
Seal Length: 12", 15" and 19"
Sealing Capacity: 8 mils. maximum
Temperature Range: 600F±2F. Digital readout for validation in Fahrenheit or Celsius
Timer: ± .05 seconds Digital readout for validation
Pressure Range: Adjustable pressure with gauge readout for validation
Mounts: Flat mount - standard, for use in standing position Incline base 30¼ angled away from operator, for sitting position
Vertical mount: 90 degrees away from table surface. Used for sealing liquids or powders, for sitting position.
Air Requirement: minimum of 30 psi at 2.5 cfm
Electrical: 115 volts, 50/60 cycle, single phase - standard 230 volts, 50/60 cycles, single phase - optional
Accessories (Optional): Sealing head for barrier materials, allows the sealing of full range of packaging materials. Universal Sealing Stand: powder coated metal stand.
