• Return to Applications Menu


Sealing Machines for Barrier Materials

(HEAT APPLIED TO BOTH SIDES OF MATERIAL)


BANDRITE BANDSEALER Model 6000

See product information under section titled “Sealing Machines for Polyethylene and Barrier Materials.”


THERMO MOTOR JAW Model TMJ Shipped via UPS (wt. 37#).

Semi-automatic bag sealer. Can seal up to 30 bags per minute on automatic cycling. Can expect 15 bags per minute under normal operation. The machine can also be operated with a foot-activated switch for single bag operation. Dwell control is recommended, but machine is also available without dwell control. The gear motor drive gives repeatability of pressure and dwell.

Seal Width: 1" standard; Optional widths quoted on request

Seal Length: 12" and 15" standard

Sealing Capacity: No Dwell - clear films, thin Kraft and foils. Dwell - Mil-spec material, Krafts and foils

Seal Impressions: Vertical Crimp, Horizontal Crimp Flat Seal (not for clear materials)

Temperature Range: Up to 550F

Mounts: Flat Electrical: 115 volts, 60 cycle, 1 phase, AC

Accessories (Optional):

    •Embossed Code Dating Bars: quoted upon request

    •Universal Sealer Stand: powder coated metal stand

    •Teflon Cover: Used with flat seal only. Will give smoother seals on foils and some mil spec materials. Not available with embossed code dating


THERMO JAW Model TJ Shipped via UPS (wt. 23#).

Manual bag sealer will seal an average of 10 to 12 bags per minute depending on operator speed. The operator controls pressure and dwell by how long and how hard they step on the foot pedal. The unit must be mounted to the work surface or stand. A clearance hole must be drilled through the work surface for connecting the foot pedal to the sealer. The foot pedal and guard must be secured to the floor.

Seal Width: 1" standard; Optional widths quoted on request

Seal Length: 12" and 15" standard

Sealing Capacity: Most heat-sealable barrier materials

Seal Impressions: Vertical Crimp; Horizontal Crimp; Flat Seal (not for clear materials)

Temperature Range: Up to 550F

Mounts: Flat, Incline or Vertical

Electrical: 115 volts, 60 cycle, 1 phase, AC

Accessories (Optional):

•Embossed Code Dating Bars quoted upon request

•Universal Sealer Stand: painted metal stand

•1/4 inch hole punch

•Teflon Cover: Used with flat seal only. Will give smoother seals on foils and some mil spec materials. Not available with embossed code dating, or 1/4" hole punch.


ROBOT JAW SEALER Model R Shipped via truck (wt. 110#).

Air operated sealer normally used in medical and laboratory applications that require validation. Also sold as Model RTP for poly materials. Features extremely accurate control of temperature, pressure and dwell. Sold to larger companies to determine sealing parameters before starting high volume production lines.

Seal Width: 1" standard; other widths available upon request

Seal Length: 12 " and 15" standard

Sealing Capacity: Most multi-layer bags

Seal Impressions: Flat, vertical, or horizontal crimp

Temperature Range: 600F±2F; Digital readout for validation in Fahrenheit or Celsius

Timer: ± .05 seconds; Digital readout for validation

Pressure Range: 100 lbs. psi maximum depending on seal width

Mounts: Flat mount - standard, for use in standing position. Incline base 30¼ angled away from operator (optional), for use in sitting position. Vertical mount: 90¼ away from table surface (optional), used for sealing liquids or powders, for use in sitting position

Air Requirement: minimum 30 psi at 2.5 cfm

Electrical: 115 volts, 50/60 cycle, single phase - standard. 230 volts, 50/60 cycles, single phase - optional

Accessories (Optional):

•Embossed Code Dating Bars quoted upon request

•Sealing head for poly materials, allows the sealing of full range of packaging materials.

•Universal Sealing Stand: powder coated metal stand

•Teflon Cover: Used with flat seal only. Will give smoother seals on foils and some mil spec materials. Not available with embossed code dating, or 1/4" hole punch


CONTINUOUS HAND ROTARY HEAT SEALER: Model HRS Shipped via UPS (wt. 7#).

Portable manual sealer for sealing products that are too large for conventional sealers. Usually used with mil spec materials. Usually sold to government related industries.

Seal Widths: 1" standard

Seal Lengths: Infinite Sealing Impressions: Model F - flat; Model G - Bead and Groove Temperature Range: to 550F Electrical: 115 volts, 50/60hz, single phase - standard. 230 volt, 50/60hz, single phase - optional

Accessories (Optional):

•Side carrying handle for two-handed use

•Conversion kit to change from Model F to Model G

•Conversion kit to change from Model G to Model F

•Teflon coat on preheater bars and pressure rollers